SWAG Off Road Knock Out Punch Set (7) Piece Set (Tube Sizes)








SWAG Off Road Knock Out Punch Set (7) Pieces (Tube Sizes). (3/4″, 1″, 1-1/4″, 1-1/2″, 1-3/4″, 2″, 2-1/2). Are you looking to increase the speed and accuracy when cutting holes in plate steel? The SWAG (7) piece knock out punch set is capable of cutting up to. 1875 aluminum and or. Made in the USA out of domestic steel. These knock out punch dies are CNC machined out of 4130 quenched and tempered chrome moly steel then heat treated hence their brownish/orange tint. Simply put these punches are the highest quality dies that we can produce. These knock out punches are pressed together using a 10 Ton Hydraulic Knockout Punch Driver as shown in the 2nd picture above. The knock out punch set is a quality product as we have dimpled thousands of holes for years using this set up. Central Hydraulics – item #98318 for even faster semi-production speed dimpling. Here is the HF Knock Out Punch Set part #. Is the HF 10,000 PSI Air Hydraulic Pump part #. Please Note: We do not sell the hydraulic punch driver and or the Air/Hydraulic foot switch, they are shown in the image gallery for reference only. At this time we are not going to split up our knock out punches individually. Our 8 piece tube dimple die set designed to compliment our knock out punch set. Please Note: We do not sell the knock out punch set or Air/Hydraulic foot switches, they are shown in the image gallery for reference only. At this time we are not going to split up our dimple die sizes and sell them individually. The item “SWAG Off Road Knock Out Punch Set (7) Piece Set (Tube Sizes)” is in sale since Monday, December 17, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Other CNC, Metalworking & Manufacturing”. The seller is “swagoffroad” and is located in Bend, Oregon. This item can be shipped worldwide.
- Country/Region of Manufacture: United States
- MPN: 6KOPA
- Brand: SWAG MFG

SWAG Off Road Knock Out Punch Set (7) Piece Set (Tube Sizes)








SWAG Off Road Knock Out Punch Set (7) Pieces (Tube Sizes). (3/4″, 1″, 1-1/4″, 1-1/2″, 1-3/4″, 2″, 2-1/2). Are you looking to increase the speed and accuracy when cutting holes in plate steel? The SWAG (7) piece knock out punch set is capable of cutting up to. 1875 aluminum and or. Made in the USA out of domestic steel. These knock out punch dies are CNC machined out of 4130 quenched and tempered chrome moly steel then heat treated hence their brownish/orange tint. Simply put these punches are the highest quality dies that we can produce. These knock out punches are pressed together using a 10 Ton Hydraulic Knockout Punch Driver as shown in the 2nd picture above. The knock out punch set is a quality product as we have dimpled thousands of holes for years using this set up. Central Hydraulics – item #98318 for even faster semi-production speed dimpling. Here is the HF Knock Out Punch Set part #. Is the HF 10,000 PSI Air Hydraulic Pump part #. Please Note: We do not sell the hydraulic punch driver and or the Air/Hydraulic foot switch, they are shown in the image gallery for reference only. At this time we are not going to split up our knock out punches individually. Our 8 piece tube dimple die set designed to compliment our knock out punch set. Please Note: We do not sell the knock out punch set or Air/Hydraulic foot switches, they are shown in the image gallery for reference only. At this time we are not going to split up our dimple die sizes and sell them individually. The item “SWAG Off Road Knock Out Punch Set (7) Piece Set (Tube Sizes)” is in sale since Friday, April 29, 2016. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Other CNC, Metalworking & Manufacturing”. The seller is “swagoffroad” and is located in Bend, Oregon. This item can be shipped worldwide.
- Country/Region of Manufacture: United States
- MPN: 6KOPA
- Brand: SWAG MFG

SWAG Off Road Pipe Dimple Die Set (5) Pieces









SWAG Off Road Pipe Dimple Die Set (5) Pieces. Pipe is designed for fluid transfer through pipes and it is measured on the inside diameter, that is why pipe dimple dies have a odd size outside diameter. 1.115″ OD For 3/4″ Pipe. 1.362″ OD For 1.0″ Pipe. 1.6875″ OD For 1.25″ Pipe. 1.9375″ OD For 1.50″ Pipe. 2.375″ OD For 2.00″ Pipe. Whether it be for cosmetic applications or looking to improve the rigidity of plate steel the SWAG dimple dies are capable of dimpling 3/16 steel. These dimple dies are CNC machined out of 4140 quenched and tempered chrome moly steel that has a tensile strength of 150,000 KSI. Each dimple die has a through hole drilled into both the male and female dies so they can be used in a few different ways. The first method is they can be used in any H frame hydraulic press where the material you are dimpling is small enough to fit between the vertical frame rails of the press. Simply drill the appropriate size hole using an industry stand hole saw, then insert the male and female dies to the correct orientation then using the hydraulic cylinder, press the dimple dies down to flare the metal. The second method is they can be bolted together using a standard off the shelf grade 8 fasteners 3/4″ dia bolt or 7/16″ dia bolt depending upon which dimple die size you have. This method is ideal for large pieces of metal that are too large to fit in a H frame style press, dimpling on a vehicle or dimpling after the fact….. “Hey we should have put a dimple die there”… Well now you can with the through hole design that is standard on every die set we produce. The third method is they can be pressed together using a 10 Ton Hydraulic Knockout Punch Driver as shown in the picture above. The knock out punch set is a quality product as we have dimpled thousands of holes for years using this set up. Central Hydraulics – item #98318 for even faster semi-production speed dimpling. The HF 10,000 PSI Air Hydraulic Pump. Please Note: We do not sell the knock out punch set or Air/Hydraulic foot switches, they are shown in the image gallery for reference only. At this time we are not going to split up our dimple die sizes and sell them individually. The item “SWAG Off Road Pipe Dimple Die Set (5) Pieces” is in sale since Thursday, June 18, 2015. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Other CNC, Metalworking & Manufacturing”. The seller is “swagoffroad” and is located in Bend, Oregon. This item can be shipped worldwide.
- Country/Region of Manufacture: United States
- MPN: 6DDPIPEA
- Brand: SWAG MFG

SWAG Off Road Dimple Die Set (8) Pieces








SWAG Off Road Dimple Die Set (8) Pieces. (1/2″, 3/4″, 1″, 1-1/4″, 1-1/2″, 1-3/4″, 2″, 2-1/2″). Whether it be for cosmetic applications or looking to improve the rigidity of plate steel the SWAG dimple dies are capable of dimpling 3/16 steel. These dimple dies are CNC machined out of 4140 quenched and tempered chrome moly steel that has a tensile strength of 150,000 KSI. Each dimple die has a through hole drilled into both the male and female dies so they can be used in a few different ways. The first method is they can be used in any H frame hydraulic press where the material you are dimpling is small enough to fit between the vertical frame rails of the press. Simply drill the appropriate size hole using an industry stand hole saw, then insert the male and female dies to the correct orientation then using the hydraulic cylinder, press the dimple dies down to flare the metal. The second method is they can be bolted together using a standard off the shelf grade 8 fasteners 3/4″ dia bolt or 7/16″ dia bolt depending upon which dimple die size you have. This method is ideal for large pieces of metal that are too large to fit in a H frame style press, dimpling on a vehicle or dimpling after the fact….. “Hey we should have put a dimple die there”… Well now you can with the through hole design that is standard on every die set we produce. The third method is they can be pressed together using a 10 Ton Hydraulic Knockout Punch Driver as shown in the picture above. The knock out punch set is a quality product as we have dimpled thousands of holes for years using this set up. Central Hydraulics – item #98318 for even faster semi-production speed dimpling. The HF Knock Out Punch part number is. The HF 10,000 PSI Air Hydraulic Pump part number is #98318. Please Note: We do not sell the knock out punch set or Air/Hydraulic foot switches, they are shown in the image gallery for reference only. At this time we are not going to split up our dimple die sizes and sell them individually. The item “SWAG Off Road Dimple Die Set (8) Pieces” is in sale since Monday, October 6, 2014. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Other CNC, Metalworking & Manufacturing”. The seller is “swagoffroad” and is located in Bend, Oregon. This item can be shipped worldwide.
- Country/Region of Manufacture: United States
- MPN: 6DDA8
- Brand: SWAG MFG
